FREE SHIPPING ON ALL ORDERS OVER $500
FREE SHIPPING ON ALL ORDERS OVER $500
ANNULAR CUTTERS
HOUGEN STANDARD “12,000-SERIES” CUTTERS (UP TO 275 BHN)
The original mag drill annular cutter from which all others are measured. Choose from three proven options: hardened M2 HSS, TiN coated HSS, or M42 Cobalt HSS with IronEdge™ coating for maximum durability.
3/4" Weldon Shank
Up to 275 BHN
Resharpenable
Multiple Materials/Coatings
Tip: Use the filters below to quickly find your diameter, depth of cut, and type.
Choose Your 12,000-Series Option
Hardened M2 High-Speed Steel (HSS)
The standard, best all-around cutter for everyday drilling. Great balance of performance, durability, and value.
High Speed Steel (HSS) with TiN Coating
TiN coating reduces friction and improves wear resistance for longer tool life and smoother cutting—ideal for
higher-volume drilling.
M42 Cobalt High-Speed Steel (HSS) with IronEdge™ Coating
Premium option built for tougher materials and demanding jobs. Cobalt HSS plus IronEdge™ coating for maximum
durability.
How to Choose
1) Diameter
Choose hole size
Choose hole size
2) Depth
Match plate thickness
Match plate thickness
3) Pilot
Included vs required
Included vs required
4) Type
M2 / TiN / M42 Cobalt
M2 / TiN / M42 Cobalt
Hougen Tapping Kits & Required Collets for Tap Units
| Hougen Tapping Kits | |
 |
Lightweight, easy to install design incorporates a planetary gear reverse with a 1:1 ratio. Reversing speed is equal to spindle speed so in-feed and out-feed of the unit can be employed without reversing motor direction.
*When using a two speed drill always tap in low gear (250 RPM)
Instruction Sheet - HMD904 / HMD905 - Slot Drive
Instruction Sheet - HMD917
Instruction Sheet - HMD904-Hex Style
Instruction Sheet - HMD914
| Tapping Kits | |
| Part No. | Description |
| 08177 | For use with HMD904 & HMD905 (Slot Drive-includes adapter 08176) 1/2" Max. |
| 02463 | For use with HMD904 (Threaded Drive) 1/2" Max. |
| 05457 | For use with HMD904 - 1/2" Max. (Hex Drive-Includes 07339 adapter) |
| 08180 | For use with HMD917 - 3/4" Max. (Includes adapter 08179) |
| 10937 | For use with HMD914 - 3/4" Max |
| Required Collets for Tap Units: | |
| For HMD904 & HMD905 (1/2" Max.) | |
| Collets: 02495 for #6 thru 1/4" tap 02496 for 1/4" thru 1/2" tap |
|
| For HMD914 & HMD917 (3/4" Max.) | |
| Collets: 10807 for #10 thru 1/2" tap 10808 for 1/2" thru 3/4" tap |
|
| Incorporates a planetary gear reverse with a 1:1 ratio. Reversing speed is equal to spindle speed so in-feed and out-feed of the unit can be employed without reversing motor direction. |