(206) 878-1148 - HougenSales@Gmail.com
Cart 0

Hougen-Ogura Electro-hydraulic Hole Punchers

Electro-Hydraulic Hole Punches

Electro-Hydraulic Hole Punches

Quickly punch round and oblong holes in steel. Save time and money with
Hougen-Ogura's self contained electric hole punchers.

 Flat Bar H-Steel  Angle Channel  Lip Channel
Flat Bar H-Steel Angle Channel Lip Channel 75003A ONLY

76000PR - Cordless - NEW

Cordless 18V hole puncher, 76000, electro-hydraulic portable punch, punch-pro, ogura

75002.5PR

75003A

Weight 17.4 lbs (7.9 kg) Weight 24.9 lbs (11.3 kg) Weight 35.8 lbs (16.2 kg)
Max Dia. 19/32"* (15mm) Max Dia. 3/4"* (19mm) Max Dia. 25/32"* (20mm)
Pressure (tons) 11 Pressure (tons) 10.1 Pressure (tons) 14.8
Material 1/4"** (6.35mm) Material 1/4"** (6.4mm) Material 19/64"** (7.5mm)
Throat Depth .98" (25mm) Throat Depth 2-3/8" (60mm) Throat Depth 2-5/32" (54.8mm)
Speed 4.5 sec Speed 2.3 sec Speed 2 sec

75004PR

75005

75006PR

Weight 24.9 lbs (11.3 kg) Weight 79.3 lbs (36 kg) Weight 62.9 lbs (28.5 kg)
Max Dia. 25/32" (20mm) Max Dia. 7/8" (22.2mm) Max Dia. 15/16"* (23.8mm)
Pressure (tons) 16.9 Pressure (tons) 27.5 Pressure (tons) 26.9
Material 3/8" (9.5mm) Material 3/8" (9.5mm) Material 1/2"** (12.7mm)
Throat Depth 1-9/16" (40mm) Throat Depth 3-15/16" (100mm) Throat Depth 1-31/32" (50mm)
Speed 2.5 sec Speed 3 sec Speed 4 sec

* Hougen-Ogura Punches are designed for mild & structural steel, but can be used in other materials. Using in stainless or other materials significantly reduces the capacity. Consult Hougen Technical Support for questions about your particular application: (810) 635-7111 

 

All six Hydraulic Punches are 100% self contained and operate off of electrical power. Their exclusive single body construction incorporates a high efficiency hydraulic pump in the punching head. There are no separate pumps or hoses to move or fittings to leak and maintain. Ogura/Punch-Pro's improved punch and die design requires less tonnage to punch, resulting in lighter weight units which result in less operator fatigue.

Ogura/Punch-Pro's are fast to operate because they punch clean, accurate holes in as little as 1.2 seconds with the single pull of a trigger while an auto-return mechanism automatically returns the punching rod to the starting position. The punch can also easily be jogged down for accurate hole location.

Punch round or oblong holes...round holes from 1/4" to 15/16" diameters and oblong holes 1/4" X 1/2" to 11/16" X 13/16" through up to 1/2" thick materials including Flat Bar, Channel, Angle, H-Beam and Lip Channel.

* See Punch Chart for maximum thickness
** See Punch Chart for maximum punch size

Why Hougen-Ogura?